BIT United BIT-EPO PURE EPOXY RESIN

₹0.00

Availability: In stock

Quick overview

A two component chemical anchoring injection system in 1:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete
Qty:

A two component chemical anchoring injection system. A formulation derived from vinylester SF resin with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications

CHARACTERISTICS

  • Suitable for use in Seismic applications under C2.
  • Suitable for high loads within standard annulus and embedments.
  • Fast working times for early loading in time sensitive applications.
  • No styrene allows for use indoors and in enclosed spaces.
  • Use in wet or flooded environments and fixing holes.
  • High durability, resistance to chemicals.
  • Used for studs and rebar.
  • 10:1 resin available in a variety of cartridge types.
  • Fixings in concrete, wood, or other high strength materials.

APPROVALS / REPORTS

  • 18/0952 - ETA - EAD 330499-00-0601 - Concrete M8-M30 Threaded Bars 8-32mm rebars
  • 18/0948 - ETA - EAD 330087-00-0601 - Concrete 8-32mm Post-Installed Rebars + Fire
  • 18/1000 - ETA - EAD 330076-00-0604 - Masonry M8-16 Use category b,c,d.
  • CE Certified 1404-CPR-3092 / 3093 / 3136 - ZAG, Slovenia.
  • Complies with Highways Agency Interim Advice Note 104/15.
  • WRAS Approved for use with Potable drinking water* approval no. pending
  • LEED tested 2009 EQ c4.1 SCAQMD rule 1168 (2005.)
  • VOC A+ Rating (Volatile Organic Content)
  • 300 ml | 420 ml

AVAILABILITY

  • 385 ml | 585 ml | 1400 ml.

kkkk
Loading...
Please wait...