Bitunited

A two component chemical anchoring injection system, in 3:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications

Indispensable for hollow masonry applications. Once the resin has been injected, the cap holds the fixing centered.

The BIT mixer is the special unique mixer system from BIT United. Other mixers can also be supplied depending upon application. The special design of interior elements mixes the two components more homogeneously. Options of mixers with hangers are designed for to retail markets.

To lengthen the nozzle for special applications in very deep holes.

Perforated metal sleeves are an effective way to create a fixing, where there is a hollow void, such as in many types of block and brick work. These sleeves come in 1 metre lengths, in different diameters. Resin is injected to fill the volume of the sleeve, and then forced through the perforations when the fixing rod is inserted. This distributes the resin evenly in the fixing cavity, forming a solid joint between the resin, the fixing and the sleeve.

Internal threaded sockets to create a removable fixing for use with chemical anchoring resin, and very often with perforated nylon sleeves. Internal threaded sockets are designed to be used either alone, with chemical anchor resin to create a removable fixing. The threaded insert can be used with a standard thread bolt. These can be used in concrete, asphalt, and very often with perforated nylon sleeves in hollow voids. The plastic blue collar prevents resin overflow, and the metal is galvanised to prevent corrosion.

A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally to anchor threaded rods into concrete, and for masonry and hollow wall installations.

A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally to anchor threaded rods. Covered by ETA approval for concrete, and masonry/hollow wall installations.

A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally for installations in temperatures of up to -20ºC

Two-component polyester mortar to fix threaded metal elements in a concrete floor, stone or plain brick.

Especially designed for hole cleaning during installation process. With a good balance between lightness and robustness. 190mm push pump is pictured.

WIRE BRUSHES

The BIT United site kit case has been specifically designed to suit BIT United cartridges and accessories. The kit contains everything required to complete a safe and efficient chemical anchor fixing.

A two component chemical anchoring injection system. A formulation derived from vinylester SF resin with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications.

A two component SF chemical anchoring injection system. A formulation derived from vinylester resin with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications.

A two component chemical anchoring injection system in 1:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete. Used for high performance structural applications.

A two component chemical anchoring injection system in 1:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete

A two component chemical anchoring injection system. A formulation derived from epoxy acrylate SF resin with high bond strength, developed principally to anchor threaded rods into concrete. Used widely for medium to high loads.

A two component chemical anchoring injection system. A formulation derived from epoxy acrylate resin with high bond strength, developed principally to anchor threaded rods into concrete.

A two component chemical anchoring injection system. A formulation derived from polyester resin with high bond strength, developed principally to anchor threaded rods into concrete, and for masonry and hollow wall installations.

Spray for cleaning any type of surface. The new hydro-alcohol solution for maintaining the cleanliness and hygiene of the work environment.

All BIT United manual extrusion tools are made to a high quality and offer a number of significant benefits in design. Each tool has a smooth and comfortable trigger ratio designed to deliver a smooth but powerful force in all conditions.