Ashima Tower 128 Rajdanga Gold Park 2nd Floor Kolkata—700107 West Bengal India
¦ | Equipped with a 20kW high-power water-cooled motor |
¦ | Lightweight and compact with an aluminum frame |
¦ | Uses an oil cooler with high heat exchange efficiency, allowing continuous use for a long time |
¦ | The lightweight FRP cover can be opened and closed even with the hydraulic hose connected. |
¦ | Equipped with a drain valve to prevent freezing damage to the water-cooled motor in the cold season |
¦ | Equipped with a magnet on the drain bolt of the hydraulic tank to remove iron powder etc. mixed in the hydraulic oil |
¦ | 5/8 "hydraulic hose 20m with low pressure loss is included as standard |
¦ | A "main control device (sold separately)" that can adjust the rotation speed of hydraulic equipment by lever operation can be installed. |
?Applicable models? | |
¦ | Small hydraulic wire saw DSM series |
¦ | Hydraulic core drill SPU series |
¦ | Hydraulic wall cutter CHW series |
¦ | Hydraulic plunge cutter PCH-48V |
Specification table | ||||
Model name | E-2002A | |||
Power supply used | Commercial power supply | Three-phase 200 / 220V 50 / 60Hz 100A or more | ||
Generator | 37 / 45kVA or more | |||
Electric motor | Three-phase induction motor Water-cooled 20kw 2P | |||
Hydraulic pump | name | High pressure variable piston pump | ||
Discharge pressure setting | maximum | 28MPa (Hakken products should be set to 21MPa or less) |
||
Factory default | 21MPa | |||
Discharge rate | 50Hz | Setting range | 23.5-47.9l / min | |
Factory default | 41.7l / min | |||
60Hz | Setting range | 28.3-57.6l / min | ||
Factory default | 50.2l / min | |||
Coupler | vomit | Nitto Kohki Flat Face Coupler 1/2 "Plug | ||
return | Nitto Kohki Flat Face Coupler 1/2 "Socket | |||
oil cooler | Water-cooled | |||
Hydraulic oil tank capacity | 20l | |||
Hydraulic hydraulic oil | Mineral wear resistant hydraulic hydraulic oil ISO-VG46 | |||
Hook outlet output for controlling hydraulic equipment | Single-phase 200 / 220V 15A | |||
Dimensions W × L × H | 680 x 943 x 902 to 1,242 mm 680 x 792 x 824 mm (without handle) |
|||
Body mass (excluding cord) | 200kg | |||
Standard accessories | Hydraulic hose 5/8 "set FF plug-socket 20m (2) Single-ended wrench 13mm (1) |